Alumina Ceramic Tiles – for abrasion, corrosion and low friction resistant applications
Product Name：Alumina Ceramic Tiles
Product H.S Code:690912
Product Materials：Alumina
Product Color：White
Certificate:ISO9001
Customized：Available
Product Packaging:Cartons and Pallet
Alumina Ceramic Tile Available Sizes and Shapes
• Sided Tile-from 1/4” to 3” (6mm to 75mm) thickness, in solid or weldable-type tile design.
• Thin square/hex Tile - from 1/8” to 1/4" (3mm to 6mm) thickness.
• Mechanically Interlocking Tile (Tongue and Grooved) - from 1" to 4" (25mm to 100mm) thickness.
• Hexagonal Tile — from 1/8” to 1" (3mm to 25mm), in 6" x 6" (152rnm) matted, or custom matted for convex and concave surface linings. Loose, flat to flat, or point to point hex tile pieces also available.
• Side-Angled Pipe Tile - in 1/2" (12mm) and 1" (25mm) thicknesses.
• Monolithic Cylinders (Max Diameter 500mm)
Product Details
Alumina Ceramic Tile is of high wear resistance, acid and alkli resistance, effectively prolong the service life of equipment and considered to be the best choice of anti-wearing and anti-corrosion material; Wear resistance of ceramic is 266 times than that of special manganese, 171.5 times to high chrome cast iron; Hardness is much higher than that of wear-resistant steel and stainless steel
Alumina Ceramic – Abrasion Resistant Linings Alumina is a cost effective and widely used material in the family of engineered ceramics. Alumina ceramics have been developed and optimized for maximum wear resistance and corrosion resistance. A high density, diamond like hardness, fine grain structured and superior mechanical strength are the unique properties that make it the material of choice for a wide range of demanding applications. Ceramic has uses similar to cast basalt but it has greater resistance to wear in high velocity applications and impact resistance in extreme dynamic systems. CBP Engineering provides its customers with the full range of abrasion resistant lined pipe work including straight pipe and elbows, reducers, tees and y-pieces. CBP Engineering offers a comprehensive range of linning materials designed to combat erosion.
Installed on site or in our factory Ceramic tiles can be bedded and jointed in cement or special bonding agents such as epoxy. CBP Engineering can assist you in the technical analysis to optimize the matching of mortars and cements to meet the applications at your plant. CBP Engineering also offers on site installation services providing skilled labor and supervision.
Alumina Ceramic Tiles Technical Data Sheet
|
Category |
HC92 |
HC95 |
HCT95 |
HC99 |
|
Al2O3 |
≥92% |
≥95% |
≥ 95% |
≥ 99% |
|
ZrO2 |
/ |
/ |
/ |
/ |
|
Density(gr/cm3) |
＞3.60 |
＞3.65g |
＞3.70 |
＞3.83 |
|
HV 20 |
≥950 |
≥1000 |
≥1100 |
≥1200 |
|
Rock Hardness HRA |
≥82 |
≥85 |
≥88 |
≥90 |
|
Bending Strength MPa |
≥220 |
≥250 |
≥300 |
≥330 |
|
Compression strength MPa |
≥1050 |
≥1300 |
≥1600 |
≥1800 |
|
Fracture Toughness (KIc MPam 1/2) |
≥3.7 |
≥3.8 |
≥4.0 |
≥4.2 |
|
Wear Volume (cm3) |
≤0.25 |
≤0.20 |
≤0.15 |
≤0.10 |
Alumina Ceramic Tiles Advantages
- High hardness
- Superior abrasion resistance
- Corrosion and chemical resistance
- Light weight than steel
- Can be applied in all kinds industrial abrasion solution field
Alumina Ceramic Tiles Applications
- mining industry
- Cement industry
- Coal handling industry
- Steel industry
- Port industry
- Power plant
