Products
-
ZIRCONIA (YSZ) GRINDING CYLINDERS
Product Features Preventing material from contamination
High grinding efficiency
Suitable for high viscosity, wet grinding and dispersion
So it’s tougher and more resistant to wear and deterioration from a long term point of view. -
Wear Resistant Cyclone Linings Made from Alumina
A cyclone is a specially designed system used to separate materials using centrifugal forces. The materials fed into a cyclone are typically hard and the environment within a cyclone is inherently highly abrasive. Hence wear inside a cyclone is an operational hazard. YIHO Ceramic Engineering have the materials and expertise to be able to minimize wear of your cyclone linings and thus reduce downtime and increase efficiency.
-
Abrasion Resistance Ceramic Lining Pipe
Abrasion Resistance Ceramic Lining Pipe
Abrasion resistance ceramic lining pipes are designed and lined with high quality alumina ceramic material like alumina rings. The abrasion resistance ceramic lining pipe as a whole part, and then assemble it into the steel pipe with our high-strength-temperature-resistant epoxy adhesive. The pipe consists of three layers: smooth ceramic lining (compact corundum), ceramic and metal transition layer and the outer steel pipe. We can produce abrasion resistance ceramic lining pipe as per customer’s requirement and application.
-
Impact Ceramic Block/Cube
The Ceramic Cube is a high-performance abrasion and impact resisting linings for high-impact, high-pressure applications in which ceramic tile may not have sufficient structural resistance, and high-performance rubber may not offer the required wear life. In extreme applications, the Cube liners can be installed in a matrix or abrasion resistant steel plate to provide structural support for the ceramic/rubber matrix and provide exceptional wear life where competing products cannot.
-
Wear resistant steel-rubber-ceramic panel vulcanized ceramic plates
In aggressive industrial applications, equipment where high impact , high abrasion inevitably suffer mechanical attack, chemical attack, corrosion, or by a combination of these three modes.
YIHO’s Ceramics can offer various of ceramic liner plate for customer’s abrading environment. Composite ceramic wear liner is intended for the toughest applications with very high materials. when a combination of extreme wear and impact resistance ans long wear life is needed , Ultraming offer composite ceramic wear liner with large and hard ceramic bricks vulcanized into a matrix of wear resistant rubber .due to its elastic properties the rubber acts as a dampener. It makes it possible to use this product in applications with a lot of impact without the risk of crushing the ceramic bricks .
-
CERAMIC CLINDER FOR EXTREME WEAR PROTECTION
Mineral Processing equipment operates in some of the harshest and remote locations. It is crucial to the Mineral Processing industries that this equipment continues to operate efficiently and its life cycle is maximized to minimize down time. By appropriately protecting equipment from the extreme wear caused by the high speed and flow rates of ore when processed as a slurry ensures better equipment longevity. Slurry is highly abrasive and can not only cause wear damage to wet processing equipment but also with the inclusion of chemicals and heat, there is constant risk of corrosion and dangerous leakage.
-
Industrial ceramic wear tiles
Wear-resistant elements prevent destruction in the transportation, processing, mining and other technological equipment. The elements are made of high-purity, finely dispersed, alpha-alumina. Wear-resistant plates can be made from a variety pre-designed element of different dimensions and forms.
-
Ceramic tubes and special-shaped parts
Wear resistant ceramic which are mainly composed of at least 90% Al2O3 are the most widely used in the world today.
Our products are made from strictly selected alumina powder with uniform particle sizes and low CaO content.Wear resistant ceramics can be made through common dry press or isostatic pressing process and then sintering them at high temperature in the kiln. They are desirable lining materials for high wear equipment due to precise dimensions, high density,high alumina content,good flatness and stable quality.
-
Abrasion& Anti impact Ceramic Skirting Canoe Liners
Keeping product on the line and off of adjacent walkways and equipment is critical to maintaining a safe and productive work environment. Our tough skirting liners are available in solid rubber or a combination rubber/ceramic matrix, our high wearing skirt liners keep ore in line and protect your equipment, saving time and money while increasing production. Handy Tee slot mounting allows for use in skirting or solid wall wear applications and are interchangeable.
-
Wear-resistant ceramic bonding steel plate
The Wear-resistant ceramic bonding steel plate is to directly bond the toughened wear-resistant ceramic with a high-strength organic adhesive or an inorganic adhesive with a maximum temperature of 350 ℃ directly into the steel plate, and is used as an anti-wear lining for material conveying equipment in room temperature environments.
-
Wear and Impact Resistant Conveyor Chute Wear Liner Alumina Ceramic Rubber Wear Plate
Conveyor Chute Wear Resistant Ceramic Rubber Liner is made of high alumina ceramics and high-quality natural rubber compounded by a special process.
-
YIHO Premium AluminaCeramic Wear Lining Tiles for Various Abrasion Application
YIHO Premium Alumina|Ceramic Wear Lining Tiles for Various Abrasion Application
YIHO Premium Engineered Ceramics provide excellent impact and wear resistant characteristics for superior longevity in the harshest applications.
